When should you use soda blasting?

2:33 AM Dhanur Chauhan 0 Comments

You will see that soda blasting is comparatively new technique and it is highly effective in paint and rust removal. It is slowly high popularity. Unlike sandblasting, soda blasting uses bicarbonate or baking soda to strip the paints.

While sandblasting can be a technique or rather an equipment to use for soda blasting, you will find the bicarbonate relatively gentle. In case, if you compare the same with grit usually put to use for sandblasting.

In order to figure out what is the best instances to use for soda blasting, here are some of the greatest attributes –
  1. It is great on soft metals and wooden substances-Soda blasting is one of the best techniques that work well on the soft metals such as copper. It also gels well with wooden substances. In sandblasting, you will see that it will not let you scratch on wood or metal surface below the paint. The key to soda blast correctly amounts to the pressure exerted and when you will find the soda sprayed on to some surface, just like those forceful washers at a tilted angle. If you find that the pressure exerted is very much high, the substrate will let you have a dent. At the use of right pressure, one must be able to slip away little since one layer end at a time.
  2. It is a great cleaner-If you need a careful finish on any substance or any surface; you will see soda blasting is one of the ideal ways out. When you use sandblasting, you will find the grit expelled from the hose of a blaster and is dangerous for the atmosphere. The bicarbonate of the soda blaster will let you simply dissolve into the land and wash away during the rainstorm. Moreover, the dust produced due to sandblasting grit may be toxic. A soda blaster strips an end and reduces the same into tiny particles which may float in the atmosphere and these particles can be toxic enough if you inhale. For this reason, this is significant to wear protective equipment when you use a soda blaster.
  3. It is very effective in removing grease & rust-Soda blasting not just removes paint and lacquers, this is strong enough to remove the rust, grease & required debris from substrates too. The process is a little better in removing grime from the surfaces than harder organic materials such as the walnut shells, as it is easy to enter & clean smaller crevasses and cracks, which widens organic compound and might not be able to reach.
  4. It is able to prevent rust-
    After the surface is completely able to blast the soda, you will find a white powdery film to develop that would stay on the surface. This film will be able to prevent the rust for a small period and left on the metal behind. If the metal is required to polish and make it shine, one can easily wash away the film with soap and water.
Therefore, you can use any of the following methods for soda blasting and can act as a helpful guide anytime.